LIVE OR NOT
About live or not
- MORE : Windows
- Go to : https://angryip.org/download/
The first step in the process of scanning is to
determine whether the target is alive or not. This can be
done using the ping tool that is readily available on
both Windows and Linux computers. Just open the command prompt
if you are on Windows or terminal window if you are on Linux
and type ping followed by the target IP address as shown below:
ping 173.252.120.6
If the target is alive and online, you should get a reply from the target
or you if the target is not alive you will get a response saying
“ping request cannot find the host”.